Sand making machine uses

Richardmrax

⒈ river pebbles, rocks (limestone, granite, basalt, diabase, andesite, etc.), ore tailings, the artificial sand stone chips.
⒉ construction aggregates, highway road fabric, cushion material, asphalt concrete and cement concrete aggregate production.
⒊ water conservancy and hydropower engineering, highway, highway, railway, passenger railway, bridges, airport runways, municipal engineering, the sand making machine production of high-rise building sand and stone shaping.
⒋ mining industry front finely grinding technology, building materials, metallurgy, chemical, mining, refractories, cement, abrasive material crushing and other industries.
⒌ high abrasion and secondary crushing disintegration, thermal power, in addition to sulfur metallurgical industry, steel slag, construction waste crushing and other environmental projects.
⒍ glass, quartz sand and other high purity materials.
Sand Product Overview Product Usage
Sand purpose is crushing the material to -5mm granularity equipment. In the engineering field, is sand (artificial sand), cushion material, asphalt concrete and cement concrete aggregate mix Sand site ideal production equipment. In the mining industry, widely used in the preceding grinding process, it can produce large amounts of iron ore fines, reducing the high cost of grinding load. Widely used in all kinds of hard, medium, fine ore areas especially hard materials, cement, refractories, bauxite, carborundum, glass raw materials high. It is generally used in the mechanism building sand, stone and various metallurgical slag crushing, and other types of stone crusher compared to yield high efficiency.
As the series sand making machine excellent low wear characteristics, the device also for high abrasion and secondary crushing disintegration of production use. In addition, because of the product's zero pollution, impact crusher function well adapted to the production of glass quartz sand and other high purity materials in, 10-500t / h production capacity, impact crusher can meet almost any production requirement.
Practice Check before driving
⒈ tune whirl chamber door is closed tightly observed, to prevent the material from the door out of the whirl chamber observed, danger.
⒉ Check the impeller rotation direction, as viewed from the discharge port. Impeller should rotate counterclockwise, or should adjust the motor wiring.
Boot sequence ⒊ crusher and conveyor equipment for: crusher discharge Feeding.
4 crusher must be unloaded start until after the crusher is operating normally feed direction.
Shutdown and boot sequence in reverse order.
⒌ discharge device stopping when feeding should be stopped, otherwise, it will result in crushing the impeller, burning motor.
⒍ seek continuous and uniform feeding.
⒎ crusher during operation, without excessive vibration and unusual noise, otherwise, you should stop and check.
⒏ machine lubrication, lubrication oil lubrication to dry, using Mobil car run super fat, the amount of the bearing cavity 1 / 2-2 / 3, when the crusher each work group, add the right amount of grease, working several after classes, open main bearings cleaned main bearing, replace the bearing if necessary.