P2P networking
salam,aku cuba buat point 2 point conection guna LAN cable, takleh la...
operating system winXP pro,
adakah, ia auto detect? atau kene konfig apa2?
sekian soklan seposen dari saya...
p/s: harap2 network card aku tak rosak... cable guna cable biasa atau cross cable ? biasa je, erk... apa beza tu? gi cari thread pasal cable lekas .
click kat show digest kat page yang lmist semua thread tu biasa punya, bukan cross cable ... kalau biasanya
kena pakai hub / switch.. pakai tak hub atau switch?
kalau takde hub atau switch, kena pakai cross cable ..
kalau tak takde network rasanya dah paham, kene guna cross cable kalo dari pC1 ke pC2 dan kene guna TCP/IP kan? betul ke?
tak guna network switch/hub... ada USB DSL -streamyx kat PC1... nak share ni... :bgrin: ha'ah ..
pandai pun
banyak lagi thread sedia ada yang bleh bantu :bgrin: mekasih! ... :bgrin: erk, lagi satu,
ada 10 PC, 1 dijadikan server.
9 pC okey je boleh networking melalui network switch
pC server tadi plak yang seblom ni okey, tetiba lak takleh online...
nape a??? dah puas adjust... still tak okey...
puncanya, aritu, pasang karpet kat LAB, pasang balik, takleh dah... :stp: Psl psg karpet?
I rasa u patut check cable tu sama ada masih ok ke tak. Cable tester tak mahal sangat. dah test, cable tester ada, okey je...
lampu network card blinking... tak steady... seblom ni okey je... cable pon dah tukar... config tak ubah pon... network driver okey, takde ubah apa2...
(3 hari punya kes! ) server tu sambung ke mana ?
ke switch gak ke ? yep, SMC 8 port. ada bridge cable sambung (jadi 2 unit 8port) total 14 port.
takkan nak kene cross cable jugak? hehe..
server tu takde perubahanlah?
maybe masa angkut server tu, NIC tergegar, dan windows install baru driver dia. Nie pun problem gak nie. Hamba nasihatkan, uninstall dulu driver tu, cabut semula card dan install driver baru. bridge cable mesti pakai cross cable Originally posted by Remy_3D at 11-3-2004 05:22 AM:
bridge cable mesti pakai cross cable
ye ke? tapi balance pC lain okey plak... :lol
nape ek? :stp:
Remy3D Post on 11-3-2004 05:21 AM
hehe..
server tu takde perubahanlah?
maybe masa angkut server tu, NIC tergegar, dan windows install baru driver dia. Nie pun problem gak nie. Hamba nasihatkan, uninstall dulu driver tu, cabut semula card dan install driver baru.
aku try reinstall driver je, kang aku usik la network card tu esok, ish... sempat ke bangun esok ni? :stp: tu yg uniknya dunia network nie bzzts, ko gilah tukar cable tu dulu, dan cuba sekali lagi masyaAllah... eh, InsYaAllah... :lol cross cable punya image ni confusing le.
dalam http://www.networkeverywhere.com/educateme/wireanetwork.asp ni, takde pun description pasal crossed cable, dia cuma explain pasal straight through aje.
http://www.networkeverywhere.com/educateme/images/cabcr.jpg
utk crossed cable boleh le cucuk dari pC1 ke pC2 straight dan config dia punya TCP/IP?
- yang sebelah kanan, kaler wayar tu kene cross lagik,
receive dah tukar jadi :
Pin1 : orange/white -green/white
Pin2 : orange - green
Pin3 : Green/White -orange/white
Pin4 : Blue - blue (REMAIN)
Pin5 : Blue/white - Blue/white (REMAIN)
Pin6 : green - orange
Pin7 : Brown/white - Brown/white(REMAIN)
Pin8 : Brown - Brown (REMAIN)
http://www.networkeverywhere.com/educateme/images/cabst.jpg
Straight-through cables are used for connecting computersto a hub. Crossed cables are used for connecting a hub to another hub
(there is an exception: some hubs have a built-in uplink port that is crossed internally,which allows you touplink hubs together with a straight cable instead).
p's: kalo salah, tolon betulkan...
[ Last edited by bzzts on 11-3-2004 at 01:48 PM ]